Auto-meter 2304 User Manual download pdf (Page 2)

12 MONTH LIMITED WARRANTY

Auto Meter Products, Inc. warrants to the consumer that all Auto Meter High Performance products will be free from defects in material and workmanship for a period of twelve (12) months from date of the

original purchase. Products that fail within this 12 month warranty period will be repaired or replaced at Auto Meter's option to the consumer, when it is determined by Auto Meter Products, Inc. that the product

failed due to defects in material or workmanship. This warranty is limited to the repair or replacement of parts in the Auto Meter instruments. In no event shall this warranty exceed the original purchase price of

the Auto Meter instruments nor shall Auto Meter Products, Inc. be responsible for special, incidental or consequential damages or costs incurred due to the failure of this product. Warranty claims to Auto Meter

must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. All implied warranties shall be limited in

duration to the said 12 month warranty period. Breaking the instrument seal, improper use or installation, accident, water damage, abuse, unauthorized repairs or alterations voids this warranty. Auto Meter

Products, Inc. disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by Auto Meter.

SERVICE

For service send your product to Auto Meter in a well packed shipping carton. Please include a note explaining what the problem is along with your phone number. Please specify when you

need the product back. If you are sending product back for Warranty adjustment, you must include a copy (or original) of your sales receipt from the place of purchase.

FOR SERVICE SEND TO: AUTO METER PRODUCTS, INC. 413 W. Elm St., Sycamore, IL 60178 USA (815) 895-8141

Email us at service@autometer.com

To operate the Auto gage Shift-Lite

tachometer, first determine your

engine's shift point for max.

horsepower (for example, 3400 rpm).

Turn on the power to the tach. Set the

desired RPM by turning the adjust

knob on the back of the tach, the

pointer will move. Stop when it

reaches the desired shift point. Turn

the power off. The tach will now use

the selected shift point, until set differently. When the tachometer

reaches your set point, the red shift light will come on. It will stay on

until the engine speed drops below the set point.

* Note: If the engine is running, the shift point

can't be set.

* Note: The shift point setting can be checked

anytime the vehicle is started. Turn the ignition on

and the shift point setting will show on the dial.

Shift-Lite Operation

(Models 2302 & 2309)

Dial Rotation

RPM

x1000

180180°

180°

The dial can be rotated for optimum

legibility. Loosen the screw at the center

back of the cup, turn the bezel, then re-

tighten the screw. Rotate dial no more

than 180° in either direction. If binding is

felt, remove cup and reposition wires.

Shift-Lite Cover

RPM

x1000

IMPORTANT: The 2309 Tachometer

Shift-Lite is designed for maximum

brightness during daylight use. This may

be too bright for night driving A yellow

bulb cover is included to reduce the

brightness for night driving.

Models 2302 & 2309

2b. Mount the tachometer to the base. Place the

tachometer on the mounting base and slide

the screw through the lock washer and flat

washer as shown. Then slide

through the base and the

tachometer. Screw

tightly into pre-

installed nut on other

side.

Models 2300, 2301, 2303, & 2304

2a. Mount tachometer to base, Place

tachometer on mounting base and

slide screw through base and

tachometer, tighten on opposite side

with washer and nut provided.

Lock

Washer

Flat

Washer

Back View

of Tach

Back View

of Tach

*Note: Lock washer and flat washer

must be underhead of screw.

The Auto gage 2302 & 2309 tachometers works on the following

ignitions:

Chrysler Blue Box Ford Standard Electronic

Chrysler Gold Box MSD (with tach terminal)

Chrysler Silver Box Most other OEM standard

GM HEI CD, and electronic ignitions.

Accel Laser I & II, and BEI ignitions are compatible with the Auto

gage model 2302 tachometer when used with Auto Meter Model

5215 BEI/Laser Adapter. Laser II with date code of 8100 or higher

do not require adapter and use Figure B for hook-up.

Special Note

Your model 2302 tachometer operates off your car's ignition.

Problems such as bouncing ignition points, bad plug wires, defective

ignition capacitor, or arcing distributor cap may cause erratic

readings on your tachometer. To insure steady, accurate readings,

make necessary adjustments to your ignition.

Use a 12 volt 2 watt bulb (Model 3217) as a replacement bulb for

night lighting.

RPM

x1000

Red

Shift-Lite

Shift point

set knob

RPM

x1000

Model 2309

Mounting

1. Mount the tachometer base in the

desired location with the screws

provided. When selecting a

location for the base, be sure the

tachometer can be adjusted to

the proper position.

2650-468H 12/5/01

1 2

Comments to this Manuals

No comments

Auto-meter 2304 User Manual Page 2

Comments to this Manuals

Related products and manuals for For the car Auto-meter 2304